| CAREERS OPPORTUNITY |
|---|
| Date Posted |
Job Title |
Contact Information |
Location |
| March 24, 2011 |
Laboratory Technician I/II/III |
HR@ccsemc.com |
Fremont, CA |
|
Job Responsibility
- Examines test samples and reads blueprints, schematics, wiring diagrams, measuring instruments, and operational instructions. Evaluates test performance and reviews test and construction data with supervisor.
- Builds and/or adapts setup and test equipment to new situations, based on data sheets and instructions from engineering department personnel. May direct staff in test setups.
- Operates designated machines that may include furnaces, ovens, hydraulic equipment, electrical test equipment, temperature indicating devices, tensile testers, analytical balances, meters, hand tools, personal computer, and special laboratory equipment such as oscilloscopes, spectrometers, environmental chambers with consoles, Steiner furnace, and radiation measuring devices. Performs routine maintenance of designated test equipment and laboratory area.
- Receives instructions from and reports data to engineers and other laboratory personnel. May communicate with clients during the setup and performance of a test to demonstrate or otherwise illustrate equipment test methods and/or to discuss test results. Communicates with UL field representatives to discuss additional follow-up tests, samples, equipment, methods and/or results.
- Records observed or calculated data on appropriate UL forms and prepares data sheets and reports, as directed.
- Performs other duties as directed.
Required Skills
- Demonstrated ability to perform all common laboratory tests, record laboratory results, and provide feedback regarding inaccurate or unclear data sheets.
- Some University education ( Associate's degree) in a related discipline.
Additional Skills/Requirements
- Specific test duties will include EMC and RF testing to wireless regulatory test specifications, SAR, HAC, and/or OTA requirements. Experience in these areas and/or with FCC, ETSI, CTIA, and similar standards and procedures a plus.
- Testing capabilities desired include familiarity and operation of environmental chambers, RF analyzers, power meters, wireless call generators and simulators, SAR/HAC equipment. Familiarity and/or experience with IEEE 1528, Agilent 8960, Rohde & Schwarz CMU 200 and SPEAG DASY systems is a plus but not mandatory.
- Must be able to work with customers and engineering staff to properly setup and operate products under test such as wireless devices, routers, computer equipment and networks, and similar equipment.
|
| Date Posted |
Job Title |
Contact Information |
Location |
| March 24, 2011 |
Project Engineer |
HR@ccsemc.com |
Fremont, CA |
|
Job Responsibility
- Independently determines project scope, develops a preliminary plan of investigation, and determines project specifications such as cost, time, and sample requirements by analyzing client input, available supplemental data, and product construction. Projects may include frequent travel to conduct or witness tests at client sites.
- Initiates communication with clients to promote and explain the benefits of new and existing services. Follows up on contacts from clients. Communicates with clients to discuss technical issues, explain UL procedures and requirements, convey project cost, and negotiate completion date and sample requirements. Acts to address client concerns and to resolve client issues. Provides technical assistance to clients in reference to product inspection and follow-up services.
- Establishes appropriate test programs by reviewing files and manufacturer's information, examining samples, and applying UL requirements. Notifies client of any areas in which the product is not in compliance with UL requirements or of any changes in project scope or specifications.
- Coordinates laboratory activities by preparing data sheets and instructions to technicians, scheduling and reviewing work of Laboratory Technicians and support staff and establishing completion dates. Coordinates administrative aspects of project management. Serves as Project Handler of record and may sign as Reviewer of record as assigned.
- Communicates project status and results to clients through frequent contact and by preparing reports. Prepares Follow-Up Service Procedures and information pages.
- Integrates continuous improvement concepts and techniques into all aspects of the job.
- Resolves engineering issues associated with Variation Notices by analyzing and reporting on the acceptability of the variations.
- Proposes development of new and/or revised UL requirements. Develops special test methods and test equipment. Coordinates and/or performs File Reviews. May represent UL at industry related functions such as seminars and trade shows.
- May provide direction as a Primary Designated Engineer or Designated Engineer for specific product categories.
- May directs and review work of assigned staff. May train office, field, and/or laboratory staff and entry level engineers. Provides technical assistance to laboratory and/or field staff.
- Performs other duties as directed.
Required Skills
- Detailed knowledge of the technical vocabulary common to the appropriate discipline.
- Working knowledge of conformity standards in use in area of expertise.
- Demonstrated ability to apply project-handling concepts in use in area of expertise.
- University Degree ( Bachelor's degree) in Engineering, Engineering Technology, Industrial Technology, Manufacturing Technology, or Physics from an ABET accredited program.
- Four years directly related work experience.
Additional Skills/Requirements
- Specific test duties will include EMC and RF testing to wireless regulatory test specifications, SAR, HAC, and/or OTA requirements. Experience in these areas and/or with FCC, ETSI, CTIA, and similar standards and procedures a plus.
- Testing capabilities desired include familiarity and operation of environmental chambers, RF analyzers, power meters, wireless call generators and simulators, SAR/HAC equipment. Familiarity and/or experience with IEEE 1528, Agilent 8960, Rohde & Schwarz CMU 200 and SPEAG DASY systems is a plus but not mandatory.
- Must be able to work with customers and engineering staff to properly setup and operate products under test such as wireless devices, routers, computer equipment and networks, and similar equipment.
|
|
|
| Frequently Asked Questions |
|---|
|
Please select the following topics:
|
|
