|
Standard
|
Description
|
|
IEEE Std 1528 (2003)
|
IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques
|
|
ETSI EN 300 086-2 v1.1.1 (2001-03)
|
ERM; Land Mobile Service; Radio equipment with an internal or external RF connector intended primarily for analogue speech; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE
|
|
ETSI EN 300 113-2 v1.3.1 (2003-07)
|
Radio equipment intended for the transmission of data using constant or non-constant envelope modulation and having an antenna connector; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
|
|
ETSI EN 300 197 v1.6.1 (2002-07)
|
Fixed Radio Systems; Point-to-point equipment; Parameters for radio systems for the transmission of digital signals operating at 32 GHz and 38 GHz
|
|
ETSI EN 300 198 v1.5.1 (2002-07)
|
Fixed Radio Systems; Point-to-point equipment; Parameters for radio systems for the transmission of digital signals operating at 23 GHz
|
|
ETSI EN 300 219-1 v1.2.1 (2001-03)
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment transmitting signals to initiate a specific response in the receiver; Part 1: Technical characteristics and methods of measurement
|
|
ETSI EN 300 219-2, v1.1.1 (2001-03)
|
ERM; Land Mobile Service; Radio equipment transmitting signals to initiate a specific response in the receiver; Part 2: Harmonized EN covering essential requirements under Article 3.2 of the R&TTE Directive
|
|
EN 300 220-1 V1.3.1 (2000-09)
|
Electromagnetic compatibility and Radio spectrum Matters; Short Range Devices; Radio equipment to be used in the 25 MHz to 1,000 MHz frequency range with power levels ranging up to 500 mW; Part 1: Technical characteristics and test methods
|
|
ETSI EN 300 220-2 v1.3.1 (2000-09)
|
ERM; Short Range Devices; Radio equipment to be used in the 25 MHz to 1,000 MHz frequency range with power levels ranging up to 550 mW; Part 2: Supplementary parameters not intended for conformity purposes
|
|
EN 300 220-3 V1.1.1 (2000-09)
|
ERM; Short Range Devices; Radio equipment to be used in the 25 MHz to 1,000 MHz frequency range with power levels ranging up to 500 mW; Part 3: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
|
|
ETSI EN 300 220-1 V2.1.1 (2006-04)
|
Electromagnetic Compatibility Radio Spectrum Matters; Short Range Devices; Radio Equipment to be used in the 25 MHz to 1,000 MHz Frequency Range with Power Levels Ranging up to 500mW; Part 1: Technical Characteristics and Test Methods
|
|
ETSI EN 300 220-2 V2.1.1 (2006-04)
|
ERM; Short Range Devices; Radio Equipment to be used in the 25MHz to 1,000 MHz Frequency Range with Power Levels Ranging up to 550 mW; Part 2: Supplementary Parameters Not Intended for Conformity Purposes
|
|
EN 300 224-1 V1.3.1 (2001-01)
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); On-site paging service; Part 1: Technical and functional characteristics, including test methods
|
|
ETSI EN 300 224-2 v1.1.1 (2001-01)
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); On-site paging service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive
|
|
ETSI EN 300 296-1 v1.1.1 (2001-03)
|
Electromagnetic compatibility and Radio spectrum Matters (ERM): Land Mobile Service; Radio equipment using integral antennas intended primarily for analogue speech; Part 1: Technical characteristics and methods of measurement
|
|
ETSI EN 300 296-2 v1.1.1 (2001-03)
|
ERM; Land Mobile Service; Radio equipment using integral antennas intended primarily for analogue speech; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
|
|
ETSI EN 300 328-2 v1.2.1 (2001-12)
|
Wideband Transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation techniques; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
|
|
ETSI EN 300 328 V1.5.1 (2004-08)
|
ERM; Wideband Transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
|
|
ETSI EN 300 328 V1.6.1 (2004-07)
|
ERM; Wideband Transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
|
|
ETSI EN 300 328 V1.7.1 (2006-10)
|
ERM; Wideband Transmission Systems; Data transport equipment operating in the 2.4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
|
|
ETSI EN 300 330-1 v1.3.2 (2002-12)
|
ERM; Short Range Devices; Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 1: Technical characteristics and test methods
|
|
ETSI EN 300 330-2 v1.1.1 (2001-06)
|
ERM; Short Range Devices (SRD); Radio equipment in the frequency range 9kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive
|
|
ETSI EN 300 330-1 V1.5.1 (2006-04)
|
ERM; Short Range Devices; Radio Equipment in the Frequency Range 9kHz to 25 MHz and Inductive Loop Systems in the Frequency Range 9kHz to 30 MHz; Part 1: Technical Characteristics and Test Methods
|
|
ETSI EN 300 330-2 V1.3.1 (2006-04)
|
ERM; Short Range Devices (SRD); Radio Equipment in the Frequency Range 9kHz to 30 MHz; Part 2: Harmonized EN Under Article 3.2 of the R&TTE Directive
|
|
EN 300 339 v1.1.1 (1998-03)
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); General ElectroMagnetic Compatibility (EMC) for radio communications equipment
|
|
ETSI EN 300 341-2 v1.1.1 (2000-12)
|
ERM; Land Mobile service (RP 02); Radio equipment using an integral antenna transmitting signals to initiate a specific response in the receiver; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive
|
|
ETSI EN 300 373-1, v1.2.1 (2002-10)
|
ERM; Maritime Mobile transmitters and receivers for use in the MF and HF bands; Part 1: Technical characteristics and methods of measurement
|
|
ETSI EN 300 373-2, v1.1.1 (2004-01)
|
ERM; Maritime Mobile transmitters and receivers for use in the MF and HF bands; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
|
|
ETSI EN 300 373-3, v1.1.1 (2004-01)
|
ERM; Maritime Mobile transmitters and receivers for use in the MF and HF bands; Part 3: Harmonized EN covering essential requirements under article 3.3(e) of the R&TTE Directive
|
|
ETSI EN 300 390-2 v1.1.1 (2000-09)
|
ERM; Land Mobile Service; Radio equipment intended for the transmission of data (and speech) and using an integral antenna; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
|
|
ETSI EN 300 390-1 v1.2.1 (2000-09)
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment intended for the transmission of data (and speech) and using an integral antenna; Part 1: Technical characteristics and test conditions
|
|
ETSI EN 300 422-2 v1.1.1 (2000-08)
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless microphones in the 25 MHz to 3 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive
|
|
ETSI EN 300 422-2 v1.2.2 (2000-08)
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless microphones in the 25 MHz to 3 GHz frequency range; Part 1: Technical characteristics and test methods
|
|
ETSI EN 300 431 v1.4.1 (2002-07)
|
Fixed Radio Systems; Point-to-point equipment; Parameters for radio system for the transmission of digital signals operating in the frequency range 24.50 GHz to 29.50 GHz
|
|
ETSI EN 300 440-1 v1.3.1 (2001-09)
|
Electromagnetic compatibility and Radio spectrum Matters (ERM): Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 1: Technical characteristics and test methods
|
|
ETSI EN 300 440-2 v1.1.1 (2001-09)
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive
|
|
ETSI EN 300 440-2 v1.1.2 (2004-07)
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive
|
|
ETSI EN 300 440-2 v1.2.1 (2008-03)
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive
|
|
ETSI EN 300 454-1 v1.1.2 (2000-08)
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wide band audio links; Part 1: Technical characteristics and test methods
|
|
ETSI EN 300 454-2 v1.1.1 (2000-08)
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wide band audio links; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive
|
|
ETSI EN 300 471-1, v1.2.1 (2001-05)
|
ERM; Land Mobile Service; Rules for Access and the Sharing of common used channels by equipment complying with EN300 113; Part 1: Technical characteristics and methods of measurement
|
|
ETSI EN 300 471-2, v1.1.1 (2001-05)
|
ERM; Land Mobile Serivce; Rules for Access and the Sharing of Common Used Channels by Equipment Complying with EN 300 113; Part 2: Harmonized EN Covering Essential Requirements under Article 3.2 of the R&TTE Directive
|
|
ETSI EN 300 630 v1.3.1 (2001-02)
|
Fixed Radio Systems; Point-to-point equipment; Low capacity point-to-point digital radio systems operating in the 1.4 GHz frequency band
|
|
ETSI EN 300 633 v1.3.1 (2001-02)
|
Fixed Radio Systems; Point-to-point equipment; Low and medium capacity point-to-point digital radio systems operating in the frequency range 2.1 GHz to 2.6 GHz
|
|
ETSI EN 300 639 v1.3.1 (2001-02)
|
Fixed Radio Systems; Point-to-point equipment; Sub-STM-1 digital radio systems operating in the 13 GHz, 15 GHz and 18 GHz frequency bands with about 28 MHz co-polar and 14 MHz cross-polar channel spacing
|
|
ETSI EN 300 761-1 v1.2.1 (2001-06)
|
ERM; Short Range Devices (SRD); Automatic Vehicle Identification (AVI) for railways operating in the 2.45 GHz frequency range; Part 1: Technical characteristics and methods of measurement
|
|
ETSI EN 300 761-2 v1.1.1 (2001-06)
|
ERM; Short Range Devices (SRD); Automatic Vehicle Identification (AVI) for railways operating in the 2.45 GHz frequency range; Part 2: Harmonized standard covering essential requirements under article 3.2 of the R&TTE Directive
|
|
ETSI EN 301 021 v1.6.1 (2003--07)
|
Fixed Radio Systems; Point-to-multipoint equipment; Time Division Multiple Access (TDMA); Point-to-multipoint digital radio systems in frequency bands in the range 3 GHz to 11 GHz
|
|
ETSI EN 301 126-1 v1.1.2 (1999-09)
|
Fixed Radio Systems; Conformance testing; Part 1: Point-to-Point equipment - Definitions, general requirements and test procedures
|
|
ETSI EN 301 126-2-1 v1.1.1 (2000-12)
|
Fixed Radio Systems; Conformance testing; Part 2-1: Point-to-Multipoint equipment; Definitions and general requirements
|
|
ETSI EN 301 126-2-2 v1.1.1 (2000-11)
|
Fixed Radio Systems; Conformance testing; Part 2-2: Point-to-Multipoint equipment; Test procedures for FDMA systems
|
|
ETSI EN 301 126-2-3 v1.1.1 (2000-11)
|
Fixed Radio Systems; Conformance testing; Part 2-3: Point-to-Multipoint equipment; Test procedures for TDMA systems
|
|
ETSI EN 301 126-2-4 v1.1.1 (2000-11)
|
Fixed Radio Systems; Conformance testing; Part 2-4: Point-to-Multipoint equipment; Test procedures for FH-CDMA systems
|
|
ETSI EN 301 126-2-5 v1.1.1 (2000-11)
|
Fixed Radio Systems; Conformance testing; Part 2-5: Point-to-Multipoint equipment; Test procedures for DS CDMA systems
|
|
ETSI EN 301 126-3-1 v1.1.2 (2002-12)
|
Fixed Radio Systems; Conformance testing; Part 3-1: Point-to-Point antennas; Definitions, general requirements and test procedures
|
|
ETSI EN 301 166-2 v1.1.1 (2001-12)
|
ERM; Land Mobile Service; Radio equipment for analogue and/or digital communication and operating on narrow band channels and having an antenna connector; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
|
|
ETSI EN 301 166-1, v1.1.2 (2001-12)
|
ERM; Land Mobile Service: Radio equipment for analogue and/or digital communication and operating on narrow band channels and having an antenna connector; Part 1: Technical characteristics and methods of measurement
|
|
ETSI EN 301 213-1 v1.1.2 (2002-02)
|
Fixed Radio Systems; Point-to-multipoint equipment; Point-to-multipoint digital radio systems in frequency bands in the range 24.25 GHz to 29.5 GHz using different access methods; Part 1: Basic parameters
|
|
ETSI EN 301 213-2 v1.3.1 (2001-06)
|
Fixed Radio Systems; Point-to-multipoint equipment; Point-to-multipoint digital radio systems in frequency bands in the range 24.25 GHz to 29.5 GHz using different access methods; Part 2: Frequency Division Multiple Access (FDMA) methods
|
|
ETSI EN 301 213-3 v1.4.1 (2002-02)
|
Fixed Radio Systems; Point-to-multipoint equipment; Point-to-multipoint digital radio systems in the frequency bands in the range 24.25 GHz to 29.5 GHz using different access methods; Part 3: Time Division Multiple Access (TDMA) methods
|
|
ETSI EN 301 213-4 v1.1.1 (2001-08)
|
Fixed Radio Systems; Point-to-multipoint equipment; Point-to-multipoint digital radio systems in frequency bands in the range 24.25 GHz to 29.5 GHz using different access methods; Part 4: Direct Sequence Code Division Multiple Access (DS-CDMA) methods
|
|
ETSI EN 301 213-5 v1.1.1 (2001-10
|
Fixed Radio Systems; Point-to-multipoint equipment; Point-to-multipoint digital radio systems in frequency bands in the range 24.25 GHz to 29.5 GHz using different access methods; Part 5: Multi-Carrier Time Division Multiple Access (MC-TDMA) methods
|
|
ETSI EN 301 357-2 v1.2.1 (2001-06)
|
ERM; Cordless audio devices in the range 25 MHz to 2,000 MHz; Consumer radio microphones and in-ear monitoring systems operating in the CEPT harmonized band 863 MHz to 865 MHz; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive
|
|
ETSI EN 301 357-1 v1.2.1 (2001-06)
|
ERM: Cordless audio devices in the range 25 MHz to 2,000 MHz; Consumer radio microphones and in-ear monitoring systems operating in the CEPT harmonized band 863 MHz to 865 MHz; Part 1: Technical characteristics and test methods
|
|
ETSI EN 301 357-2 V1.3.1 (2006-05)
|
ERM; Cordless Audio Devices in the Range 25 MHz to 2,000 MHz. Part 2: Harmonized EN covering essential requirements of 3.2 of the R&TTE Directive
|
|
ETSI EN 301 357-1 V1.3.1 (2006-05)
|
ERM; Cordless Audio Devices in the Range 25 MHz to 2,000 MHz; Part 1: Technical Characteristics and Test Methods
|
|
ETSI EN 301 390 v1.2.1 (2003-07
|
Fixed Radio Systems; Point-to-point and Multipoint Systems; Spurious emissions and receiver immunity limits at equipment/antenna port of Digital Fixed Radio Systems
|
|
ETSI EN 301 459, v1.2.1 (2000-10)
|
SES; Harmonized EN for SIT and SUT transmitting towards satellites in geostationary orbit in the 29.5 to 20.0 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE Directive
|
|
ETSI EN 301 489-1 v1.5.1 (2004-11)
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements
|
|
ETSI EN 301 489-3 v1.4.1 (2002-08)
|
Electromagnetic compatibility and Radio spectrum Matters; ElectroMagnetic Compatibility standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz
|
|
ETSI EN 301 489-4 v1.3.1 (2002-08)
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 4: Specific conditions for fixed radio links and ancillary equipment and services
|
|
ETSI EN 301 489-5 v1.3.1 (2002-08)
|
Electromagnetic compatibility & Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 5: Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech)
|
|
ETSI EN 301 489-6 v1.2.1 (2002-08)
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 6: Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment
|
|
ETSI EN 301 489-7 v1.2.1 (2002-08)
|
ERM; EMC standard for radio equipment and services; Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS)
|
|
ETSI EN 301 489-8 v1.2.1 (2002-08)
|
ElectroMagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 8: Specific conditions for GSM base stations
|
|
ETSI EN 301 489-9 v1.3.1 (2002-08)
|
ERM; EMC standard for radio equipment and services; Part 9: Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and in-ear monitoring devices
|
|
ETSI EN 301 489-10 v1.3.1 (2002-08)
|
EMR; ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 10: Specific conditions for First (CT1 and CT1+) and Second Generation Cordless Telephone (CT2) equipment
|
|
ETSI EN 301 489-16 v1.2.1 (2002-08)
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility standard for radio equipment and services; Part 16: Specific conditions for analogue cellular radio communications equipment, mobile and portable
|
|
ETSI EN 301 489-17 v1.2.1 (2002-08)
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment
|
|
ETSI EN 301 489-18 v1.3.1 (2002-08
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 18: Specific conditions for Terrestrial Trunked Radio (TETRA) equipment
|
|
ETSI EN 301 489-19 v1.2.1 (2002-11)
|
ERM; ElectroMagnetic Compatibility (EMC) standard for radiio equipment and services; Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1.5 GHz band providing data communications
|
|
ETSI EN 301 489-20 v1.2.1 (2002-11)
|
Electromagnetic compatibility and Radio spectrum Matters; ElectroMagnetic Compatibility standard for radio equipment and services; Part 20: Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS)
|
|
ETSI EN 301 489-23 v1.2.1 (2002-11)
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 23: Specific conditions for IMT-2000 CDMA Direct Spread (Ultra) Base Station (BS) radio, repeater and ancillary equipment
|
|
ETSI EN 301 489-24 v1.2.1 (2002-11)
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 24: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and portable (UE) radio and ancillary equipment
|
|
ETSI EN 301 489-25 v2.2.1 (2003-05)
|
Electromagnetic compatibillity and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 25: Specific conditions for IMT-2000 CDMA Multi-carrier Mobile Stations and ancillary equipment
|
|
ETSI EN 301 489-26 v2.2.1 (2003-05)
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 26: Specific conditions for IMT-2000 CDMA Multi-carrier Base Stations and ancillary equipment
|
|
ETSI EN 301 489-22, v1.2.1 (2002-08)
|
ERM; ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 22: Specific conditions for ground based VHF aeronautical mobile and fixed radio equipment
|
|
ETSI EN 301 489-22, v1.3.1 (2003-11)
|
ERM; ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 22: Specific conditions for ground based VHF aeronautical mobile and fixed radio equipment
|
|
ETSI EN 301 489-1 v1.6.1 (2005-09)
|
ERM; ElectroMagnetic Compatability (EMC) Standard for Radio Equipment and Services; Common Technical Requirements
|
|
EN 301 502 V8.1.2 (2001-07)
|
Harmonized EN for Global System for Mobile communications (GSM); Base Station and Repeater equipment covering essential requirements under article 13.21 of the R&TTE directive (GSM 13.21 version 8.1.2 Release 1999)
|
|
EN 301 511 V9.0.2 (2003-03)
|
Global System for Mobile communications (GSM); Harmonized EN for mobile stations in the GSM 900 and GSM 1,800 bands covering essential requirements under article 3.2 of the R&TTE directive (1999/5/EC)
|
|
ETSI EN 301 751 v1.2.1 (2002-11)
|
Fixed Radio Systems; Point-to-Point equipments and antennas; Generic harmonized standard for Point-to-Point digital fixed radio systems and antennas covering the essential requirements under article 3.2 of the 1999/5/EC Directive
|
|
ETSI EN 301 753 v1.2.1 (2003-07)
|
Fixed Radio Systems; Multipoint equipment and antennas; Generic harmonized standard for multipoint digital fixed radio systems and antennas covering the essential requirements under article 3.2 of the Directive 1999/5/EC
|
|
ETSI EN 301 783-2 v1.1.1 (2000-09)
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Commercially available amateur radio equipment; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
|
|
ETSI EN 301 796 v1.1.1 (2000-09)
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Harmonized EN for CT1 and CT1+ cordless telephone equipment covering essential requirements under article 3.2 of the R&TTE Directive
|
|
ETSI EN 301 797 v1.1.1 (2000-09)
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Harmonized EN for CT2 cordless telephone equipment covering essential requirements under article 3.2 of the R&TTE Directive
|
|
ETSI EN 301 839-1, v1.1.1 (2002-06)
|
ERM; Radio equipment in the frequency range 402 MHz to 405 MHz for Ultra Low Power Active Medical Implants and Accessories; Part 1: Technical characteristics, including electromagnetic compatibility requirements, and test methods
|
|
ETSI EN 301 839-2, v1.1.1 (2002-06)
|
ERM; Radio equipment in the frequency range 402 MHz to 405 MHz for Ultra Low Power Active Medical Implants and Accessories; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
|
|
ETSI EN 301 840-2 v1.1.1 (2001-06)
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Digital radio microphones operating in the CEPT Harmonized band 1,785 MHz to 1,800 MHz; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive
|
|
ETSI EN 301 840-1, v1.1.1 (2001-06)
|
ERM; Digital radio microphones operating in the CEPT Harmonized band 1,785 MHz to 1,800 MHz; Part 1: Technical characteristics and methods of measurement
|
|
ETSI EN 301 843-1, v1.1.1 (2001-02)
|
ERM; ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services; Part 1: Common technical requirements
|
|
ETSI EN 301 843-2, v1.1.1 (2001-02)
|
ERM; ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services; Part 2: Specific conditions for radiotelephone transmitters and receivers
|
|
ETSI EN 301 843-2, v1.2.1 (2004-06)
|
ERM; ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services; Part 2: Specific conditions for VHF radiotelephone transmitters and receivers
|
|
ETSI EN 301 843-5, v1.1.1 (2004-06)
|
ERM; ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services; Part 5: Specific conditions for MF/HF radiotelephone transmitters and receivers
|
|
ETSI EN 301 843-1 V1.2.1 (2004-06)
|
ERM; ElectroMagnetic Compatability (EMC) Standard for Marine Radio Equipment and Services; Part 1: Common Technical Requirements
|
|
ETSI EN 301 893 V1.2.3 (2003-08)
|
Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
|
|
ETSI EN 301 893 V1.3.1 (2005-08)
|
Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
|
|
ETSI EN 301 893 V1.4.1 (2007-12)
|
Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
|
|
ETSI EN 301 908-1, v2.2.1 (2003-10)
|
Base Stations, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 1: Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements of article 3.2 of the R&TTE Directive
|
|
ETSI EN 301 908-2, v2.2.1 (2003-10)
|
Base Stations, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 2: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive
|
|
ETSI EN 301 908-3, v2.2.1 (2003-10)
|
Base Stations, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 3: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (BS) covering essential requirements of article 3.2 of the R&TTE Directive
|
|
ETSI EN 301 908-4, v2.2.1 (2003-10)
|
Base Stations, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 4: Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (UE) covering essential requirements of article 3.2 of the R&TTE Directive
|
|
ETSI EN 301 908-5, v2.2.1 (2003-10)
|
BS, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 5: Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (BS & Repeaters) covering essential requirements of article 3.2 of the R&TTE Directive
|
|
ETSI EN 301 908-6, v2.2.1 (2003-10)
|
Base Stations, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 6: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (UE)covering essential requirements of article 3.2 of the R&TTE Directive
|
|
ETSI EN 301 908-7, v2.2.1 (2003-10)
|
Base Stations, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 7: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential requirements of article 3.2 of the R&TTE Directive
|
|
ETSI EN 301 908-8, v1.1.1 (2002-01)
|
Base Stations, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 8: Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements of article 3.2 of the R&TTE Directive
|
|
ETSI EN 301 908-9, v1.1.1 (2002-01)
|
Base Stations, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 9: Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements of article 3.2 of the R&TTE Directive
|
|
ETSI EN 301 908-10, v2.1.1 (2003-12)
|
Base Stations, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 10: Harmonized EN for IMT-2000, FDMA/TDMA (DECT) covering essential requirements of article 3.2 of the R&TTE Directive
|
|
ETSI EN 301 908-11, v2.3.1 (2004-07)
|
Base Stations, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 11: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD)(Repeaters) covering essential requirements of article 3.2 of the R&TTE Directive
|
|
ETSI EN 301 908-7 V2.2.2 (2005-01)
|
ERM; Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation Cellular Networks; Part 7: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) Covering Essential Requirements of Article 3.2 of the R&TTE Directive
|
|
ETSI EN 301 908-7 V3.0.0 (2006-06)
|
ERM; Base Stations (BS), Repeaters, and User Equipement (UE) for IMT-2000 Third-Generation Cellular Networks: Part 7: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) Covering Essential Requirements of Article 3.2 of the R&TTE Directive
|
|
ETSI EN 301 997-1, v1.1.1 (2002-06)
|
Transmission and Multiplexing (TM); Multipoint equipment; Radio Equipment for use in Multimedia Wireless Systems (MWS) in the frequency band 40.5 GHz to 43.5 GHz; Part 1: General requirements
|
|
ETSI EN 301 997-2, v1.1.1 (2003-09)
|
TM; Multipoint equipment; Radio Equipment for use in Multimedia Wireless Systems in the frequency band 40.5 GHz to 43.5 GHz; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
|
|
ETSI EN 302 186 v1.1.1 (2003-11)
|
Satellite Earth Stations and Systems (SES); Harmonized EN for satellite mobile Aircraft Earth Stations (AESs) operating in the 11/12/14 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE directive
|
|
ETSI EN 303 035-1 v1.2.1 (2001-12)
|
Terrestrial Trunked Radio (TETRA); Harmonized EN for TETRA equipment covering essential requirements under article 3.2 of the R&TTE Directive; Part 1: Voice plus Data (V+D)
|
|
ETSI EN 303 035-2 v1.2.2 (2003-01)
|
Terrestrial Trunked Radio (TETRA); Harmonized EN for TETRA equipment covering essential requirements under article 3.2 of the R&TTE Directive; Part 2: Direct Mode Operation (DMO)
|
|
EN 300 471-1 version 1.1.1
|
ERM; Land Mobile Service, Access protocol, occupation rules and corresponding technical characteristics of radio equipment for the transmission of data on shared channels - Part 2: Harmonized EN covering the essential requirements under ...
|
|
EN 300 674-1, version 1.2.1
|
ERM; RTTT; DSRC transmission equipment (500 kbits/s 250 kbits/s) operating in the 5,8 GHz ISM band; Part 1 General characteristics and test methods for RSU and OBU
|
|
EN 300 674-2-1, version 1.1.1
|
ERM; RTTT; DSRC transmission equipment (500 kbits/s 250 kbits/s) operating in the 5,8 GHz ISM band; Part 2 Harmonized EN under Article 2 of R&TTE Directive; Sub - Part 1: Requirements for RSU
|
|
EN 300 674-2-2, version 1.1.1
|
ERM; RTTT; DSRC transmission equipment (500 kbits/s 250 kbits/s) operating in the 5,8 GHz ISM band; Part 2 Harmonized EN under Article 2 of R&TTE Directive; Sub - Part 2: Requirements for OBU
|
|
EN 301 217-4-2, v1.1.3
|
Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas - Part 4-2: Harmonized EN covering essential requirements of Article 3(2) of R&TTE Directive for antennas
|
|
EN 301 489-28, version 1.1.1 (2004-07)
|
ERM; EMC Standard for radio equipment and services - Part 28: Specific conditions for wireless digital video links
|
|
ETSI EN 301 489-1 V1.7.1 (2006-07)
|
ERM; ElectroMagnetic Compatibilty (EMC); Standard for Radio Equipment and Services; Part 1: Common Technical Requirements
|
|
ETSI EN 301 489-7 v1.3.1 (2005-11)
|
ERM; EMC standard for radio equipment and services; Part 7: Specific conditions for moble and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS)
|
|
ETSI EN 301 489-24 v1.3.1 (2005-11)
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 24: Specific Conditions for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and Portable (UE) Radio and Ancillary Equipment
|
|
ETSI EN 301 489-25 V2.3.2 (2005-07)
|
ERM; ElectroMagnetic Compatibility (EMC); Standard for Radio Equipment and Services; Part 25: Specific Condition for IMT-2000 CDMA Multi-Carrier Moble Stations and Ancillary Equipment
|
|
ETSI EN 301 489-26 V2.3.2 (2005-07)
|
ERM; ElectroMagnetic Compability (EMC) Standard for Radio Equipment and Services; Part 26: Specific Conditions for CDMA 1x Spread Base Spectrum Stations, Repeaters and Ancillary Equipment
|
|
EN 302 195-1 V1.1.1 (2004-03)
|
ERM; Radio equipment in the frequency range 9kHz to 315kHz for Ultra Low Power Active Medical Implants (ULP-AMI) and accessories; Part 1: Technical characteristics and test methods
|
|
EN 302 208-1, v1.1.2 (2006-07) and v1.1.1 (2004-09)
|
ERM; RF Identification Equipment operating in the band 865 MHz 868 MHz with power levels up to 2 W; Part 1: Technical requirements and methods of measurement
|
|
EN 302 208-2 v1.1.1 (2004-09)
|
ERM; RF Identification Equipment operating in the band 865 MHz 868 MHz with power levels up to 2 W; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive
|
|
EN 302 217-3, v1.1.3
|
Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas - Part 3: Harmonized EN covering essential requirements of Article 3(2) of R&TTE Directive for equipment operating in frequency bands where no..
|
|
EN 302 288-2, v1.1.1
|
ERM; Short Range Devices; RTTT; Short Range Radar equipment operating in the 24 GHz - Part 2: Harmonized EN covering essential requirements of Article 3(2) of the R&TTE Directive
|
|
EN 302 291-2, v1.1.1
|
ERM; Short Range Devices; Close Range Inductive Data Communication equipment operating at 13,56 MHz - Part 2: Harmonized EN covering essential requirements of Article 3(2) of the R&TTE Directive
|
|
EN 302 326-2, v1.1.2
|
Fixed Radio Systems; Multi-Point Equipment and Antennas - Part 2: Harmonized EN covering essential requirements of Article 3(2) of the R&TTE Directive for Multipoint Radio Equipment
|
|
EN 302 326-3, v1.1.2
|
Fixed Radio Systems; Multi-Point Equipment and Antennas - Part 2: Harmonized EN covering essential requirements of Article 3(2) of the R&TTE Directive for Multipoint Radio Antennas
|
|
EN 50385 (2002)
|
Product standard to demonstrate the compliances of radio BS & fixed terminal stations for wireless telecom systems with the basic restrictions or the reference levels related to human exposure to RF EM fields (110 MHz-40GHz) General public
|
|
ACA Standard 2003
|
Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 2003
|
|
Radiation Protection Series No. 3
|
Maximum Exposure Levels to Radiofrequency Fields - 3 kHz to 300 GHz
|
|
AS 2772.2 (1988)
|
Radiofrequency radiation; Part 2: Principles and methods of measurements - 300 kHz to 100 GHz
|
|
AS/NZS 4268 (2003)
|
Radio equipment and systems - Short range devices - Limits and methods of measurement
|
|
AS/NZS 4268 (2003) + A1 (2005)
|
Radio Equipment and Systems - Short Range Devices - Limits and Methods of Measurement
|
|
AS/NZS 4295 (2004)
|
Analogue speech (angle modulated) equipment operating in land mobile and fixed services bands in the frequency range 29.7 MHz to 1 GHz
|
|
AS/NZS 4295 (2004)
|
Analogue speech (angle modulated) equipment operating in land mobile and fixed services bands in the frequency range 29.7 MHz to 1 Ghz
|
|
AS/NZS 4365 (2002)
|
Radiocommunications equipment used in the UHF citizen band radio service
|
|
AS/NZS 4771 (2000) + Amendment No. 1
|
Technical characteristics and test conditions for data transmission equipment operating in the 900 MHz, 2.4 GHz and 5.8 GHz bands and using spread spectrum modulation techniques
|
|
ANSI C63.19, v3.12
|
American National Standard for Methods of Measurement of Compatibility between Wireless Communication Devices and Hearing Aids
|
|
ANSI C63.19 (2007)
|
American National Standard for Methods of Measurement Compatibility between Wireless Communication Devices and Hearing Aids
|
|
Dynamic Frequency Selection (DFS): June 2006
|
Memorandum Opinion and Order, Appendix, ET Docket No. 03-122- June 30, 2006 with FCC Method - 47 CFR Part 15, Subpart E: Intentional Radiators.
|
|
IDA TS AR, Issue 1 (July 21, 2005)
|
Technical Specification for Amateur Radio Equipment
|
|
IDA TS LMR, Issue 1, (July 21, 2005)
|
Technical Specification for Land Mobile Radio Equipment
|
|
IDA TS LMR, Issue 1, Rev 1 (August 2006)
|
Technical Specification for Land Mobile Radio Equipment
|
|
IDA TS RPG, Issue 1 (July 21, 2005)
|
Technical Specification for Radio Pagers (for Public Paging Service)
|
|
IDA TS WBA, Issue 1 (June 2005)
|
Technical Specification for Wireless Broadband Access (WBA) Equipment
|
|
IDA TS GSM-MT, Issue 1 (July 21, 2005)
|
Technical Specification for GSM Mobile Terminals
|
|
IDA TS 3G BS, Issue 1 (June 2005)
|
Technical Specification for IMT-2000 Third Generation (3G) Cellular Based Station and Repeater Station
|
|
IDA TS 3G-MT, Issue 1 (July 21, 2005)
|
Technical Specification for IMT-2000 Third Generation (3G) Cellular Mobile Terminal
|
|
IDA TS CT-CTS, Issue 1 (Dec. 2004)
|
Technical Specification for Cordless Telephones and Cordless Telecommunications Systems
|
|
IDA TS CT- CTS Issue 1, Rev 1 (April 2006)
|
Technical Specification for Cordless Telephones and Cordless Telecommunications Systems
|
|
IDA TS SRD, Issue 1, Rev. 1 (July 21, 2005)
|
Technical Specification for Short Range Devices
|
|
IDA TS SRD Issue 1, Revision 2 (August 2006)
|
Technical Specification for Short Range Devices
|
|
IDA TS SRD Issue 1, Revision 3 (January 2008
|
Technical Specification for Short Range Devices
|
|
IDA TS UWB, Issue 1 (December 2007)
|
Technical Specification for Ultra Wideband (UWB) Devices)
|
|
IS 2014-4 (May 19, 1997)
|
GSM Mobile Station, Type Approval Guidelines
|
|
IS 2015-0 (May 19, 1997)
|
Trunked Radio Mobile Station, Type Approval Guidelines
|
|
IS 2016-0 (May 19, 1997)
|
Mobile Data Terminal Equipment, Type Approval Guidelines
|
|
IS 2017-0 (May 19, 1997)
|
DCS-1800 Mobile Station, Type Approval Guidelines
|
|
IS 2018-1 (Nov. 23, 1998)
|
284.5 MHz - 285.5 MHz Radio Paging Receiver, Type Approval Guidelines
|
|
IS 2019-0 (September 9, 1998)
|
1.6/2.4 GHz Satellite Personal Communications Networks (S-PCN) Mobile Earth Stations (MESs) Technical Requirements and Type Approval Guidelines
|
|
IS 2020-4 (May 27, 1997)
|
AMPS Mobile Station, Type Approval Guidelines
|
|
Korea RRL Notification No. 2005-105 (Nov 4, 2005)
|
Radio Research Laboratory No. 2005-105: Technical Requirements for the Radio Equipment of Telecommunication Service
|
|
RRL Notice No. 2005-24 (March 18, 2005)
|
Technical Requirements for the Radio Equipment for Telecommunications Service
|
|
RRL Notice No. 2005-25 (March 18, 2005)
|
Technical Requirements for the Radio Equipment for Other Services than Broadcasting, Maritime, Aeronautical and Telecommunications Service
|
|
RRL Notice No. 2006-84 (November 4, 2005)
|
Technical Requirements for the Radio Equipment for Other Services than Broadcasting, Maritime, Aeronautical and Telecommunications Service
|
|
MIC Notice No. 2001-88 (October 10, 2001)
|
Technical Requirements for the Human Protection against Electromagnetic Waves
|
|
LP002 (January 2002)
|
Low-power Radio-frequency Devices, Technical Specifications - Sections: 3, 4.3, 4.4, 4.5, 4.6, and 4.7
|
|
RSS-102, Issue 2 (November 12, 2005)
|
using IEEE 1528 and/or IEEE C95.3 - Evaluation Procedure for Mobile and Portable Radio Transmiters with respect to Health Canada's Safety Code 6 for Exposure of Humans to Radio Frequency Fields
|
|
RSS-111 Issue 1 (July 2006)
|
Broadband Public Safety Equipment
|
|
RSS-111, Issue 2 (June 2007)
|
Broadband Public Safety Equipment
|
|
RSS-112, Issue 1 (February 2008)
|
Land Mobile and Fixed Equipment Operating in the Band 1670-1675 MHz
|
|
RSS-117, Issue 2 (March 30, 1974)
|
Land and Coast Station Transmitters Using A1, A2, A3, A2H or A3H Emissions Operating in the 200 - 535 kHz Band
|
|
RSS-118, Issue 2, Addendum & Amendment (August 19, 1990)
|
Land and Subscriber Stations: Voice, Data, and Tone Modulated, Angle Modulation Radiotelephone Transmitters and Receivers Operating in the Cellular Mobile Bands 824-849 MHz and 869-894 MHz
|
|
RSS-118, Annex A (October 22, 1983)
|
Cellular System Mobile Station Land Station Compatibility Standard
|
|
RSS-118, Addendum (September 1, 1990)
|
Cellular System Mobile Station Land Station Compatibility Standard
|
|
RSS-118, Supplement 1993-1 (June 12 1993)
|
Cellular System Mobile Station Land Station Compatibility Standard
|
|
RSS-118, Amendment #2, Issue 2, (August 24 1996)
|
Cellular System Mobile Station Land Station Compatibility Standard
|
|
RSS-119, Issue 6 (March 25, 2000)
|
Land Mobile and Fixed Radio Transmitters and Receivers, 27.41 to 960 MHz
|
|
RSS-119, Issue 8 (September, 2006)
|
Land Mobile and Fixed Radio Transmitters and Receivers, 27.41 to 960 MHz
|
|
RSS-119, Issue 9 (June 2007)
|
Land Mobile and Fixed Radio Transmitters and Receivers, 27.41 to 960 MHz
|
|
RSS-123, Issue 1, Rev. 2 (November 6, 1999)
|
Low Power Licensed Radiocommunication Devices
|
|
RSS-125 (March 25, 2000)
|
Land Mobile and Fixed Radio Transmitters and Receivers, 1.705 to 50.0 MHz, Primarily Amplitude Modulated
|
|
RSS-125 Issue 2, Revision 1 (March 25, 2000)
|
Land Mobile and Fixed Radio Transmitters and Receivers, 1.705 to 50.0 MHz, Primarily Amplitude Modulated
|
|
RSS-128 (November 6, 1999)
|
800 MHz Dual-Mode TDMA Cellular Telephones
|
|
RSS-128, Issue 2, Revision 1 (November 6, 1999)
|
800 MHz Dual-Mode TDMA Cellular Telephones
|
|
RSS-129, Issue 2 (September 25, 1999)
|
800 MHz Dual-Mode CDMA Cellular Telephones
|
|
RSS-130, Issue 2 (January 23, 1993)
|
Digital Cordless Telephones in the Band 944 to 948.5 MHz
|
|
RSS-130, Annex 1, Issue 2 (January 23, 1993) - CT2Plus Class
|
Specification for the Canadian Common Air Interface for Digital Cordless Telephony, Including Public Access Services
|
|
RSS-130, Attachment 1 (January 23, 1993)
|
European Telecommunications Standards Institute Interim Standard #1-ETS300131 (April 1992) Radio Equipment and System Common Air Interface Specification to be Used for the Interworking between Cordless Telephone Apparatus 864.1 to 868.1 MHz
|
|
RSS-131, Issue 2 (July 2003)
|
Zone Enhancers for the Land Mobile Service
|
|
RSS-132, Issue 2 (September 2005)
|
Cellular Telephones Employing New Technologies Operating in the Bands 824 - 849 MHz and 869 - 894 MHz
|
|
RSS-133, Issue 3 (June 2005)
|
2GHz Personal Communications Services
|
|
RSS-133, Issue 4 (February 2008)
|
2GHz Personal Communications Services
|
|
RSS-134, Issue 1, Rev. 1 (March 25, 2000)
|
900 MHz Narrowband Personal Communication Service
|
|
RSS-135, Issue 1 (October 26, 1996)
|
Digital Scanner Receivers
|
|
RSS-136, Issue 5 (October 2002)
|
Land and Mobile Station Radiotelephone Transmitters and Receivers Operating in the 26.960 - 27.410 MHz General Radio Service Band
|
|
RSS-137, Issue 1, Rev. 1 (September 25, 1999)
|
Location and Monitoring Service (902 - 928 MHz)
|
|
RSS-138, Issue 1 (February 7, 2004)
|
Commercial Shipborne Radar in the 2900 - 3100 MHz, 5470 - 5650 MHz and 9225 - 9500 MHz Bands
|
|
RSS-139, Isssue 1 (February 5, 2008)
|
|
|
|
|
|